by | Apr 23, 2018 | Uncategorized

Drones seem to be everywhere right now. Advancements in camera technology have long assisted in developing new techniques in the assessment and maintenance of buildings. The infrared camera allowed us to look at specific wall conditions without exploratory openings. Articulating cameras on borescopes allows us to inspect cavities using only small openings. Endoscopic cameras allow us to assess plumbing and sewer lines otherwise inaccessible. Even the Selfie-Stick has permitted building assessors and technical auditors to look good while doing it.

Building Envelope Consultant Ottawa - Building Envelope Engineering Ltd ONRecently, engineers have been handed a new tool however in the form of Unmanned Aerial Vehicles or Drones. UAVs or drones have been around for years, however, due to their increasing quality and decreasing costs they have become more prevalent inaccessible commercial purposes as of late.

The ability to easily and cost-effectively fly a camera at varying altitudes outside your building has blown open the doors for the future of building element inspection and assessment.


Drones can improve building inspections in 2 main ways: Simplifying access requirements and improving the reliability and permanence of the inspection data.

Historically, to inspect exterior building elements, Keller engineers would inspect from balconies, from the ground or adjacent buildings using binoculars, or from suspended equipment such as swing stages and bosun’s chairs. Drones have now allowed us to put eyes on the building without ever leaving the ground. Even just for a preliminary inspection, without cumbersome stages, or limitations of what you can see from balconies we can get a much closer vantage point than available with just binoculars.

Following a drone inspection, an engineer will be provided with photographic or video documentation of the drone. As much as this does not replace the engineer’s eyes, directly against the building element, the value of the permanence of this data set, and the ability to go back and review the whole inspection photage as much as you’d like, cannot be understated.


Drones come in varying sizes. The size of the drone will determine its permissible payload, which in our case, is the camera. Depending on the level of detail you require in your inspection, the style of the drone will vary. Different weather conditions or heights of the inspection will further adjust the type of drone required.

External repairs cannot be performed by drones (yet), and a qualified visual engineering inspection by way of a swing stage may ultimately be required, however, UAV inspections can allow for a prompt preliminary inspection of localized elements. For a preliminary inspection of a localized building envelope element, you would consider using a drone with as high a resolution of a camera as possible – typically requiring a larger drone.

The most practical applications of drones in building elements come from assisting in full exterior envelope surveys or thermal roof scans. Whether looking to assess the visual condition of the brick veneer for all building elevations or if you are concerned about heat loss throughout the façade or roof, infrared and detailed camera inspections can provide a permanent picture of the whole building.

Reserve Fund Studies Kingston - Reserve Fund Planning ON Reserve Fund Studies Kingston - Reserve Fund Planning ON


Largely the information is provided to you in raw data or visual format. You must consider how you obtain this data and what you do with it to turn it into a report, usable to the building owners and managers.

Will you need a condominium inspector on the ground directing the drone to specific areas or is it an entire building survey?

Will the pictures be sufficient or how will the data be interpreted to determine the condition of the building element or a surveyed quantity of deterioration?


As discussed, on smaller element inspections, the drone essentially serves as a set of eyes on the building, before you put a swing stage and perform an inspection. The biggest value in the technology comes when substituting comprehensive visual surveys of entire building facades, typically done over weeks by a team of inspectors, can now be done over 2 days with 3 operators. The need for costly swing stage setup and relocation is removed entirely.

Building Envelope Engineering Inc Ottawa - Condo Engineering ON

Using specially designed software, quantities and conditions are assessed in the office after the inspection.

It can’t be That Simple!

It’s not. As with all technologies, it has its limitations.

  • Owners and neighbors have to be appropriately notified and provide permission where applicable.
  • For the time being, the drone can only fly where the pilot can maintain a direct line of site.
  • The drone pilot and company must meet regulatory standards and file appropriate documentation before each flight.
  • Trees may obstruct some areas from the drone’s line of sight, requiring supplemental, standard investigation techniques.
  • Traffic must be controlled under the drone while it is flying, restricting the flow of vehicles on a private laneway or ruling out the UAV inspection almost entirely above a busy street.
  • Regulations are constantly evolving requiring constant attention to where the industry is going

Working within these limitations, however, companies of varying sizes and capacities are showing up to bring this technology to building owners in an overdue effort to decrease investigatory costs while increasing the reliability of these results.

Drones are changing our future for building science inspection, and their versatility should not be overlooked. Next time someone suggests performing a visual inspection or survey using a conventional technique, push a bit further and see if this is a project that can benefit from an introduction to the 21st century.